Find Parts, Click Here!
View Cart  |  About Us

Can't Find It?
Call our Knowledgeable Staff
877-722-3586
Home    KTM Hard Parts 2008 KTM Bikes KTM Bikes In Stock Check Vin Contact Us    ND Racing.com

Valid on All internet orders over $100! Click here for Shipping Details.

#1 KTM Parts Dealer in USA  -  $8 Flat Rate Ground shipping for orders under $100*   -  GoTo Main Store Page
Search By Description:    Search By Part Number: 

mouse over picture for more information or click to see larger image
scroll down to bottom of page for all items
 

PRESSURE REL IEF VALVE KIT + Release built up fork air pressure with the push of a button + Valves allow forks to work at peak performance without the use of any tools + O-ring under cap creates a positive seal to keep dirt, mud, and water out + Replaces OEM fork bleeder screws on Showa, Kayaba, and WP + Installation tool included + Made in the USA
Fits WP Upside down forks

The speed bleed buttons are a triple sealed push button valve assembly using two, piston and cylinder type o-ring applications in each valve to eliminate leakage of any kind, fluids or air in or out of the fork assembly. They install in just 5 minutes (no modifacation). Remove the stock Bleed Screws and thread in the STR Bleed Valves with the supplied wrench.
2000-2008

Fork air pump Allows you to regulate the air pressure level of your closed cartridge forks. Works with and without the adjustment wheel. Not a rebuild pump.

Everything you need to replace your heim joint bushings.

PRESSURE RELIEF
VALVE KIT- $34.95

Speed Bleed Buttons
$34.95

Fork air pump
$257.99

Shock Bearing/Bushing Kit $142.99

Finally a shock spring toll that allows your to adjust the shock spring pre-loan without having to remove the shock.

This kit can be used to help improve the performace of your KTM forks. This kit will fit all 2005 48mm fork-sets. Kit inlcudes: oil seal rings ( 2 pieces ), dust strippers ( 2 pieces ) and guide bushings ( 4 pieces ) seperate part numbers : 48600347 48600400 48600428 48600429

KTM Carbon Fiber Front Fork Guards    KTM Carbon Fiber Fork GuardsKTM Carbon Fiber Fork Guards
48 mm Forks (set of 2)

This absolute high-end off-road & enduro shock absorber is a direct copy of the shock absorber as fitted in the KTM factory off-road racing bikes competing in the off-road world-championships.

Shock Spring Adjustment
Tool - $25.99

KTM SXS Fork Tuning
Kit $175.99

Carbon Fiber
Fork Guards $66.99

SXS PDS Factory Shock
$1,750.99
Model

SXS Factory Shock single piston system features a prercision engineered spring, MX settings, low friction coating. Aluminum shock body reduces heat retention and refined spring reduces weight. High Low speed adjustability.

KTM NEOPRENE PDS PROTECTIONKeep it covered! This neoprene cover helps protect your PDS and swingarm from wear. A great investment for offroad riders.

FACTORY START KTMs already have a reputation for grabbing the holeshot, but this device helps provide an extra margin. Easy installation and when used properly, it biases weight to the front wheel during motorcross-style starts.

SXS KNOB ADJUSTMENT SET Adjust your clickers quickly and precisely to those everchanging track conditions.
48mm

SXS Factory Shock
$1,750.99

KTM Neoprene PDS
Protector $14.99

KTM Factory Start
 $61.99

SXS Knob Adjustment
Set $46.99
Model
Size

FORK PROTECTION STICKER SET These stickers not only look good, but they help keep scratches and dings off of your forks. Slap a pair on today, and you’ll be glad you did. 52000024 43mm (A) 52000025 48mm (A) 52000026 43mm (B) 52000076 48mm (C)
clear decal

../2003_CH_Images/wpclrstickers.jpg
carbon fiber look

updwnsticker.jpg (154975 bytes)

SUSPENSION STICKERS These stickers help your suspension tech keep your setting information. U6907764 6-Pack Fork and Shock

KTM Fork Protection
Decals $20.99 (set)
48mm

KTM Fork Protection
Decals $20.99 (set)
43mm/48mm

KTM USD
Decals $11.99 (set)

KTM Suspension
Stickers $6.99 set of 6
Size

POLISHED FORK SPRINGS The polished surface produces less abrasion and friction, allowing the forks to work more smoothly. Used on factory race team forks.

The right tool for removing the fork cap. Will fit over the top of the preload adjuster.

* For removing and installing the compression valve assembly from the fork cap * 17mm hex head * Made from billet 6061 T-6 aluminum * Orange anodized finish with laser engraving * Made in the USA

Black adjustable triple clamp allows unique offset adjustment capability from 17.5-20.5. Includes pivot tube and lower bearing.
All SX/EXC/XC
48mm forks only
from 17.5mm - 20.5mm

KTM Polished Fork
Springs $200.99 set of 2

Fork Cap Tool- $23.99
 USD 48mm

Motion Pro Fork Cap
Removal Tool - $32.95

SXS Black Adjustable
Triple Clamps $484.99
Size

KTM Orange anodized adjustable triple clamps. Allows unique offset adjustment vapability from 17.5-20.4mm. Set includes pivot tube and lower bearing.
48mm forks only

KTM Adjustable Trip Clamp unique offset adjustment from 18-20 mm, CNC machined, natural billet finish comes with tube and lower bearing.
48mm forks only
from 18mm - 20mm

Bronze adjustable triple clamp allows unique offset 18-20mm, comes with tube and lower bearing.
48mm forks only
from 18mm - 20mm

CNC machined triple clamps comes complete with tube and lower bearing as used by the factory team.
select from 14mm or 20mm

SXS Orange Adjustable
Triple Clamps $484.99

SXS Silver Adjustable
Triple Clamps $257.99

SXS Bronze Adjustable
Triple Clamps $263.99

SXS Triple Clamps
85SX $349.99
Size
Size

CNC machined triple clamps comes complete with tube and lower bearing as used by the factory team.
 18mm - 2002-2008

The SXS motorscross closed cartridge front fork is a result of the teamwork from championship riders, race engineers and the WP development department. The SXS front fork has multi-adjustable rebound and compression damping from the outside. All parts have a high finish to eliminate friction and to guarantee optimum lubrication: - polished springs - inner tubes are coated and polished - polished and coated aluminum piston rod - hard anodized CNC-machined parts The SXS front fork is fully dismountable and internally serviceable. It is possible to modify internal settings to create individual preferred damping performance. Works best in combination with the SXS factory shock.

The SXS off-road closed cartridge front fork is a result of the teamwork from championship riders, race engineers and the WP development department. The SXS front fork has multi-adjustable rebound and compression damping from the outside. All parts have a high finish to eliminate friction and to guarantee optimum lubrication: - polished springs - inner tubes are coated and polished - polished and coated aluminum piston rod - hard anodized CNC-machined parts The SXS front fork is fully dismountable and internally serviceable. It is possible to modify internal settings to create individual preferred damping performance. Works best in combination with the SXS off-road factory shock.

Update your fork protectors to the 2008 style.Update your fork protectors to the 2008 style.

2001-08 SX/EXC/XC 125-525

SX Adjustable Triple
Clamps 65 SX - $333.99

SXS Factory Forks
$3,182.99

SXS Factory Forks
$3,182.99

Front Fork Guards
w/Rear Protection 2008 Style
$33.99 set of 2
Size
Size
Color

FRONT FORK GUARD SETS 5900109400004 5900109400030 5900109400090 7800109400004 7800109400030FRONT FORK GUARD SETS
FRONT FORK GUARD SETS
2001-08 SX/EXC/XC 125-525

Front brake guide required. Not included with fork boot.

KTM Neoprene Fork Boots - keeps dirt and debris from getting into your forks. Durable neoprene construction allows for superior flexibility.
select from 48mm or 43mm

the perfect neoprene protection for your forks, for use with closed fork protection.
For use with closed fork
protection 48mm

Front Fork Guards
$30.99 - $32.99 set of 2

Fork Boots Conventional
Forks Only $42.00

Neoprene Fork
Boots - $26.99

Neoprene Fork
Boots - $26.99
Color
Size
Size

KTM Handlebar Height Adjusters enables you to quickly and easily adjust your handlebar height to match your stature, bar choice or riding conditions.

KTM Handlebar Height Adjusters enables you to quickly and easily adjust your handlebar height to match your stature, bar choice or riding conditions.

KTM Adventure Handlebar Riser 18mm - Enables you to adjust your handlebar height.

PRELOAD ADJUSTER SET Externally adjust your fork spring preload to better match the specific track conditions. Not for closed cartridge forks. 48600074s 48600074s9
USD 43/48 mm

Handlebar Height
Adjusters 20 mm
SX/EXC/MXC  $26.99

Handlebar Height
Adjusters 12mm $26.99

 KTM ADV Handle-
bar Risers - $36.99

Pre Load Adjustable
Fork Caps $159.95 per set
Model

BLEEDER VALVES Stainless steel Bleeder Valves allow you to release excess air built up in your forks. SXS07125610 SXS06125611

KTM Titanium Shock Bolts - shave weight quickly and easily from your bike. Lightweight and titanium strong.

KTM Fork Guard Decals - Continue the KTM factory racer look with these high quality, rugged wear Fork Guard Decals. Authentic team quality design and construction, high tack adhesive and die-cut to conform perfectly to the contours of 43mm and 48mm WP Suspension Up Side Down forks. 59001094050

FORK GUARD DECALS These rugged fork decals feature a “factory” team design and a high-tack adhesive to keep them in place. 08 Fork Guards 77301094050

Fork Bleeders - $19.99
Replacement Rubber- $3.99

Titanium Shock
Bolts $36.99

1998 - 2007 KTM Fork Guard Decals $13.99 (set)

2008 KTM Fork Guard
Decals $15.99 (set)
Choose

KTMHUTT.COM DOES NOT PROCESS INTERNATIONAL ORDERS.
International emails will not be answered or responded to.
HACKER SAFE certified sites prevent over 99.9% of hacker crime.


OEM and Aftermarket
 parts and accessories

www.ktmcyclehutt.com

Store Hours - Central Time

Mon. - Thurs.
Friday
Saturday
Sunday

9 am - 7 pm
9 am - 5 pm
9 am - 1 pm
Play'n in the Dirt

Cycle Hutt
Phone: 877-RACE-KTM
Fax: 701-222-0741
click here to email us

   ©Established 2000 All information herein applies to U.S. only.  Please see our Privacy Policy - legal terms and conditions - KTM North America Terms.
 "as for me and my house, we will serve the LORD"  Joshua 24:15 KJV ROR