Can't Find it? CALL

#1 KTM Parts Dealer in the USA

  

Valid on Internet Orders Over $99! Details
Search By Description:    Search By KTM Part Number: 

(click on image for more information)
 

KTM Front Strap
$22.99

KTM Rear Strap
$27.99

Style 3 Rear
Tugger™ - Slip-On $10.00

Style 4 Rear
Tugger™ for KTM 50/65 $11.00

 KTM 60 Piece 3/8" Tool Box Set - $141.99

Fork air pump
$257.99





The Tugger lift strap provides a convenient gripping point near the front or rear of your dirt bike. Most dirt bikes don't have a place to grab that won't toast your fingers or get your gloves all muddy. And sometimes you need to grab your bike in a hurry! No more groping for a place to grab—the Tugger is ready when you need it and stays out of the way when you don't.
Application Chart

The Tugger lift strap provides a convenient gripping point near the front or rear of your dirt bike. Most dirt bikes don't have a place to grab that won't toast your fingers or get your gloves all muddy. And sometimes you need to grab your bike in a hurry! No more groping for a place to grab—the Tugger is ready when you need it and stays out of the way when you don't.
Application Chart

KTM 60 Piece 3/8" Tool Box Set

Fork air pump Allows you to regulate the air pressure level of your closed cartridge forks. Works with and without the adjustment wheel. Not a rebuild pump.

Motion Pro Fork Cap
Removal Tool - $32.95

Compression bolt removal tool - $31.99

Digital Caliper
W/Case - $41.95

Motion Pro Ratchet Plug Wrench - $17.95

KTM SAG Scale
$29.99

KTM Wrench
Set $84.99

* For removing and installing the compression valve assembly from the fork cap * 17mm hex head * Made from billet 6061 T-6 aluminum * Orange anodized finish with laser engraving * Made in the USA

Billet, anodized aluminum tool for removing and installing the compression valve assembly from the cap on your closed cartridge forks. Allows you to properly torque the compression valve assembly during installation.
07-09 Closed Cartridge Forks

* 0-6 in. (0-150mm) measurement range with SAE to metric conversion * Can be set to zero at any position * Big LCD display * Can be interfaced with computer or printer * Locking thumb wheel * Chromed satin finish * Fine engraved marking * Tough plastic case keeps caliper clean * Includes battery and on/off switch

 # Designed to fit in limited space on many water-cooled 2-stroke engines # Ratchet mechanism works one way, turn over to reverse # Fits standard 13/16 in. plugs

KTM 11 Piece Metric Combo Wrench Set - all the sizes you need 8,10,12,13,14,17,19,21,22,24,27mm - Lifetime warranty.

KTM Pliers
Set $29.99

KTM 5-Piece Screw
Driver Set $31.99

KTM Socket
Set $58.99

KTM Chain Breaker
$60.99

Magnetic Bolt
Pan $15.99

KTM Bolt Kit $55.99

KTM Pliers Set - 3 piece plier set - cutters, needle nose and slip-joint pliers. Lifetime warranty.

KTM 5 Piece Screw Driver Set - oil resistant handles, magnetic tips with a life time guarantee.

KTM Socket Set - 1/4" drive tool box - 38 items; high quality chrome-vanadium tools; ratchet with locking device, clamping bolt, 2 extensions and socket wrench; nut spinners from 4-14; allen keys from 3-8; phillips, slotted as well as torx bits.

KTM Chain Breaker - use to quickly change your chain.

KTm Magnetic Bolt Pan - easy way to keep track of those bolts while tuning your KTM. Strong magnetic bottom with rubber coating.

KTM OEM Bolt Kit - 182 pieces, all most important parts included for SX/EXC models 30% cheaper compared to individuell parts price.

KTM Fastener
 Set $19.95

KTM Tire
Gauge $26.99

Magura Clutch
Bleed Kit $19.95

Brake Bleeding
Tool $38.95

Thermostrips
set of 3 $19.95

The Grunge Chain
Brush $12.95-$16.95

48 Piece set includes 8mm Flange Bolts (4) M6x12 Dimpled 8mm hex head flange bolt, dacromet plated 8.8 grade steel (4) M6x16 Dimpled 8mm hex head flange bolt, dacromet plated 8.8 grade steel (4) M6x20 Dimpled 8mm hex head flange bolt, dacromet plated 8.8 grade steel (4) M6x30 Dimpled 8mm hex head flange bolt, dacromet plated 8.8 grade steel 8mm Large Flange Bolts (4) M6x10 Dimpled 8mm hex head large flange bolt, dacromet plated 8.8 grade steel (4) M6x15 Dimpled 8mm hex head large flange bolt, dacromet plated 8.8 grade steel (4) M6x20 Dimpled 8mm hex head large flange bolt, dacromet plated 8.8 grade steel (4) M6x12 Dimpled 8mm hex head large flange shoulder bolt, dacromet plated 8.8 grade steel 10mm Flange Bolts (4) M8x30 Dimpled 10mm hex head flange bolt, dacromet plated 8.8 grade steel Carb Screws (4) M6x20 Dimpled 6mm hex head flange carb screw, yellow zinc plated 8.8 grade steel Washers (4) M6 Medium fender washer, clear zinc plated 8.8 grade steel (2) M6 Dish shaped washer, clear zinc plated 8.8 grade steel Nuts (1) M6 Nylon locking nut, clear zinc plated 8.8 grade steel (1) M8 Nylon locking nut, clear zinc plated 8.8 grade steel

KTM Tire Gauge is steel braided line with rubber coated exterior and pressure release button.

Magura Bleed Kit - No more pressure-point fading; Completely self-adjusting; less maintenance; Reduces lever pull up to 20%; Ready-to-mount, forged lever blade with reach-adjust feature; Filled with biodegradable mineral oil.

A must have tool for bleeding dirtbike and motorcycle brakes accurately and effeciently.

Overheating is not good—whether it's your shock, engine or cooling system. Keep an eye on these areas with a set of convenient and easy-to-use temperature strips; a pack of three.

Enables you to clean your chain with ease; 3-sided bristles allow you to clean all 4 sides of your chain and the long bristle side lets you clean other parts of your bike like sprockets and wheels; Regular component cleaning prevents premature wear and tear on chain and sprockets which assures smooth operation of the drive train; Bristle blocks are adjustable to accommodate all sizes of chain; Brush available individually or with a mild degreaser
Item

Orange Carb
Vent Hose - $12.99

KTM Hour Meter
 $48.99

Board Tools
 $45.99-$119.99

KTM Spring
Puller $12.99

Spring Puller $6.95

Moose Racing
Spring Puller - $4.95

Orange KTM Carb Vent Hose - 10' Length for any full size KTM.
venting only

KTM Hour Meter - easy to use device tells you how many hours your engine has been running. Great tool that will help you keep your KTM properly maintained.
SX/EXC/XC

KTM Board Tools. Lightweight and complete. High quality tools with everything you need in an emergency.

 KTM Spring Puller SPRINGHOOK.jpg (12078 bytes)

spring pu ller + A new twist on an old design + Strong steel construction and a comfortable new handle + Who knew that our logo makes a perfect s pring puller handle? + Super competitive price
Item
Size

Heavy Duty Spring
Hook - $14.95

Fuel Adjustment
Tool $35.99

STR Orange Fuel Adjustment Tool $23.95

Flex Jet Remote
Fuel Screw
$39.99

Zip Ty Fuel
Mix Tool $21.95

Fork Cap Tool
$24.99 48mm
Used to remove exhaust pipe springs, seat or tank holding springs, cotter pins, sidestand springs and other parts

KTM fuel adjustment tool allows you to easily adjust carburetor fuel mixture setting without any tools.
All Keihin Carburators

Fitted to shaft of the Handle is a o-ring which isolates the assembly from the vibrations / harmonics of the engine. This is a important feature that holds the setting you choose.
Keihin FCR carb.
2003-06 250-525

Why continue burning your fingers while attempting to adjust a rigid fuel screw? Or worse, fuel screws that vibrate loose while riding. R&D introduces "Flex-Jet", a simple, effective flexible shaft design that is the new industry standard. EZ quick adjustments are now within reach. Besides EZ access, another benefit is the Flex-Jet's ability to hold its setting. Loose fuel screws are now a thing of the past. Kit includes: Flex-Jet (Remote Fuel Screw), bracket, screw, spring, washer, o-ring, instructions, and sticker.


4 Stroke - 03-06
625/660 04-05

The right tool for removing the fork cap. Will fit over the top of the preload adjuster.

Shock Spring
Tool - $26.99

Orange Anodized
Tire Irons - $63.99

KTM Tire Irons
$9.99-$10.99

 KTM Mechanic
Apron - $24.99

Moose Racing
Enduro Tire Iron - $22.95

Moose Racing
TY-ER Irons- $29.95

Finally a shock spring toll that allows your to adjust the shock spring pre-loan without having to remove the shock.

KTM anodized orange tire irons aluminum 27mm, 13mm and 10mm handle end box wrenches and a wide spoon end for tire repairs.

KTM Long Curved Tire Iron
KTM Flat Short Tire Iron

ENDURO Tire Iron + Fits easily in all Moose Racing fanny packs + Hot-Forged chrome vanadium steel withstands the toughest use + Vinyl carrying pouch included + 8.5” long, weighs only 4.2 oz.

TY -ER IRONS + Ergonomic plastic molded handle for increased comfort + Spooned end prevents tubes from pinching + Zinc coated steel + Measures 10 -1/2” long + Sold in pairs + Made in the USA
Size

Moose Racing
CO2 Replacement Cartridges
$12.95 - 19.95

Moose Racing
Tire Inflator Kit - $24.95

Moose Racing
Ultimate Tire Repair Kit $32.95

 KTM Digital Tire Pressure Gauge - $42.99

Moose Racing
4 in 1 Scredriver
$2.95

CO2 Rep lacemen t Car tridges + 16 gram non-threaded CO2 replacements - 6 pack - $12.95 + 16 gram threaded CO2 replacements - 6 pack - $19.95 CO2 CARTRIDGES CANNOT BE TRANSPORTED ON AN AIRPLANE